Coloring agents and pigments in creative material
Level: Advanced. Also available as Core
The purpose of this requirement is to limit hazardous coloring agents and pigments in creative material.
Details
- Type:
- Technical specification
- ID:
- 11090:1
- Group:
- Creative materials
Criterion text
Creative material made of wood, paper, textile, leather, solid materials intended to leave a trace, accessible liquids, and modelling clay and similar shall not contain the dyes listed in the table below at levels above 10 mg/kg.
Table of limited coloring agents and their cas-no
|
Substance |
CAS-no |
|---|---|
|
Disperse Blue 1 |
2475-45-8 |
|
Disperse Blue 3 |
2475-46-9 |
|
Disperse Blue 106 |
12223-01-7 |
|
Disperse Blue 124 |
61951-51-7 |
|
Disperse Red 1 |
2872-52-8 |
|
Disperse Yellow 3 |
2832-40-8 |
|
Disperse Orange 3 |
730-40-5 |
|
Disperse Orange 37/76 |
13301-61-6 |
|
Basic Red 9 |
569-61-9 |
|
Solvent Yellow 1 |
60-09-3 |
|
Solvent Yellow 2 |
60-11-7 |
|
Solvent Yellow 3 |
97-56-3 |
|
Basic Violet 1 |
8004-87-3 |
|
Basic Violet 3 |
548-62-9 |
|
Acid Red 26 |
3761-53-3 |
|
Acid Violet 49 |
1694-09-3 |
Verification
The supplier shall, upon request, be able to present any of for example the following:
- Technical documentation, for example an analysis report from an accredited laboratory that contains information verifying that the requirement is met. Analyzes can be performed according to current versions of the standard EN 71-11 or equivalent standard.
- The supplier’s self-declaration based on technical documentation verifying that the requirement is met. The technical documentation shall be available if the contracting organization so requests. The technical documentation may, for example, consist of documentation from the manufacturer stating which dyes have been used in the product or a certificate from the manufacturer stating that none of the dyes in the requirement have been used in the product.
- The supplier’s self-declaration including technical documentation of compliance verified by an accredited verification body, accredited for the task in accordance with ISO/IEC 17029 or equivalent standard.
Proposed follow-up
Analysis report
If the requirement has been verified with analysis reports, perform spot-checks on the analysis reports and check that the values are below the requirement limit value for each substance. Also check that the analyses were performed by an accredited laboratory.
Self-declaration based on technical documentation
If the requirement has been verified with a self-declaration based on technical documentation, follow up the requirement by requesting technical documentation for spot-check.
- If the technical documentation consists of a certificate from the manufacturer stating that none of the dyes in the requirement have been used in the product, check that the product in question is covered by the certificate.
- If the technical documentation consists of documentation from the manufacturer stating which dyes have been used in the product, check that the product in question is covered by the documentation. Also check that the dyes in the requirement are not included in the documentation.
Self-declaration verified by an accredited verification body
If a verified self-declaration is used to prove that the requirement is fulfilled, request the supplier’s self-declaration, including documentation showing that the requirement is met. The self-declaration shall be verified by a verification body accredited for the task in accordance with ISO / IEC 17029 or equivalent standard.
Information about the criterion
There are currently a limited number of accredited verification bodies for ISO/IEC 17029 (Conformity assessment - General principles and requirements for validation and verification bodies) as it is a relatively new standard. This may change, especially if the demand for verifying compliance in this way increases. More information about the standard and accredited verification bodies can be found on Swedac's website.
This criterion should be used together with the criterion with the same requirement ID if the procurement includes textiles.
Environmental goals
Versions history
The version date indicates when the sustainability criterion was created or last updated. Last reviewed dated tells when we last checked that the sustainability criterion still is relevant.
- Current ID
- 11090:1
- Version date
- 2022-03-28