Sustainability criteria for Ovens | The National Agency for Public Procurement

Ovens
Download
	Energy efficiency class ovens	Core	Technical specification
Criterion information Energy-efficient ovens ensure low energy consumption, thereby reducing the environmental impact through their use. Criterion text Ovens must meet at least Class A energy efficiency for ovens in accordance with regulation (EU) No 65/2014 supplementing Directive 2010/30/EU of the European Parliament and of the Council regarding energy labelling of domestic ovens and range hoods.
	Plasticizers in plastic and rubber material including external power cable	Advanced	Technical specification
Criterion information This requirement limits the content of plasticizers with hazardous environmental and health properties in plastic and rubber materials in the appliance. Criterion text Plasticizers (phthalates) on the Candidate List must not be added to the plastic or rubber material of the appliance, including the external power cable, at concentrations higher than 0.1% by weight. Exceptions Printed circuit board, PCB Plastic and rubber parts weighing less than 25 g and included in electronics parts
	Information on the inclusion of substances of very high concern	Core	Special contract terms
Criterion information Through this condition, the contracting authority receives information regarding content of substances of very high concern in the products. Criterion text At the start of the [framework agreement/contract], the supplier shall declare the presence of any substances included in the REACH Regulation Candidate List (Article 59 of Regulation (EC) No 1907/2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals) in concentrations over 0.1 percent by weight (1,000 mg/kg) for each substance in the supplied equipment. 0,1 percent by weight applies to each individual component of a product.¹ If new substances are added to the list during the period of the [framework agreement/contract] and can be found in the procured products, the supplier is responsible to inform the procuring organization in writing regarding the change. The supplier shall upon request also present an action plan for how the substance can be phased out.
	Requirements under the ILO core conventions	Core	Special contract terms
Criterion information The contract terms on the basic level aim to ensure that the supplier has effective risk management regarding workers' rights under the ILO core conventions in its own operation as well as in the supply chain regarding subcontractors who are directly involved in the performance of the contract. Criterion text 1. The supplier's obligation Throughout the entire contract period, the supplier shall apply the contract terms under item 1-4. The contract shall be fulfilled in accordance with the following terms regarding workers’ rights: The eight core conventions of ILO regarding forced labour, child labour, discrimination, freedom of association, and the right to collective bargaining (no. 29, 87, 98, 100, 105, 111, 138, and 182). The terms regarding workers’ rights are called “the Terms” hereafter. In the event of the core conventions of the ILO are in conflict with national law, the supplier shall take reasonable measures to ensure compliancy with the international regulations. The obligations concerns workers when they perform work within the frame of the contract. The supplier shall, according to item 2, ensure that the Terms are fulfilled by hired subcontractors that directly contribute to the performance of the contract, regardless of the number of intermediaries. In addition, the supplier shall ensure that these subcontractors participate in the follow-up, according to item 3. The obligations concerns work carried out under such conditions where Swedish labour law is not applicable. 2. Policies and routines To fulfil the obligations under item 1, the supplier shall take measures to prevent and manage any deviations from the Terms according to item 2.1-2.6 below. The measures shall be documented and applied throughout the entire contract period in their own operation and the operation of any subcontractors who directly contribute to the performance of the contract, regardless of the number of intermediaries. At the start of the contract the supplier shall have: 2.1 adopted a commonly accessible policy, adopted by the highest management including a commitment to respect the Terms, 2.2. adopted routines to convey their commitment to respect the Terms in their own operation and in the supply chain, 2.3 appointed a manager at the highest management level, responsible for compliance with the Terms, 2.4 adopted routines to regularly carry out risk analyses, i.e. to identify and prioritise current and potential risks of deviation from the Terms, as well as mapping the supply chain with special regard to high risk operations, 2.5 adopted routines for regular follow-up of the Terms compliance, and 2.6 adopted routines to immediate action to prevent and limit deviations from the Terms, and to make amendments to identified deviations. The measures shall be taken in accordance with the UN Guiding Principles on Business and Human Rights, or the equivalent. 3. Follow-up [The contracting authority] has the right to follow-up that the supplier fulfils its obligations. The follow-up may be carried out in different steps; self-assessment and audit. 3.1 Self-assessment Upon request from [the contracting authority] the supplier shall, [within six (6) weeks/other time period, specified by the contracting authority] from the receipt of the request, report compliance with the Terms in writing. The account can be submitted by form, according to appendix 1: self-assessment questionnaire. The supplier is expected to provide the information requested in the appendix. *3.2 Audit* The supplier shall enable [the contracting authority] to perform audits, on their own or through a representative, with the supplier and/or its subcontractors to ensure that the supplier fulfils the obligations according to item 1 and complies with the Terms. The supplier shall provide the information and documentation necessary in connection with the audit 4. Management of deficiencies If the supplier does not participate in follow-up or if there are deficiencies in the documentation to be provided under item 3, a correction shall be made within the time determined by [the contracting authority]. In case of deficiencies in compliance to the Terms, the supplier shall amend this according to a schedule and action plan, developed by the supplier, and to be approved by [the contracting authority]. The schedule and action plan are to be developed within the time period decided by [the contracting authority] and must be proportionate to the nature of the deficiencies and clearly describe how these are to be remedied within the established schedule. [The contracting authority] has the right to terminate the contract with immediate effect if the supplier do not make amendments within the established period or do not remedy deficiencies within the established schedule. [The contracting authority] has the right to terminate the contract with immediate effect in the case of severe deviations from the Terms.
	Sustainable supply chains	Advanced	Special contract terms
Criterion information The terms regarding sustainable supply chains aim to ensure that the supplier has efficient risk management in their own operation and in the supply chain, covering the areas human rights, labour rights, environmental protection and anti-corruption. Criterion text 1. The supplier’s obligation Throughout the entire contract period, the supplier shall apply the contract terms under item 1-4. The contract shall be fulfilled in accordance with the following terms regarding human rights, workers’ rights, environmental protection, and anti-corruption (sustainable supply chains): the UN Universal Declaration on Human Rights, the UN Convention on the Rights of the Child, Article 32, the eight core conventions of the ILO regarding forced or compulsory labour, child labour, discrimination, as well as freedom of association and the right to collective bargaining, (no 29, 87, 98, 100, 105, 111, 138, and 182), the labour law in force in the country were the work is performed, including regulations for salary, working hours, leisure time, and work environment, the environmental law in force in the country were the work is performed, and the UN Convention against Corruption. The terms regarding sustainable supply chains are called “the Terms” hereafter. When international regulations prescribe a stronger protection for the individual than the national legislation, the supplier shall take reasonable measures to ensure compliancy with the international regulations. The obligations concerns all operations connected to the performance of the contract. The supplier shall, according to item 2, ensure that the Terms are fulfilled by hired subcontractors in all parts of the supply chain. In addition, the supplier shall ensure that these subcontractors participate in the follow-up, according to item 3. 2. Policies and routines To fulfil the obligations under item 1, the supplier shall take measures to prevent andmanage any deviations from the Terms according to item 2.1-2.6 below. The measures shall be documented and applied concurrently throughout the entire contract period in their own operation as well as in the operation of any subcontractors in all parts of the supply chain. At the start of the contract the supplier shall have: 2.1 adopted a commonly accessible policy, adopted by the highest management including a commitment to respect the Terms, 2.2. adopted routines to convey their commitment to respect the Terms in their own operation and in the supply chain, 2.3 appointed a manager at the highest management level, responsible for compliance with the Terms, 2.4 adopted routines to regularly carry out risk analyses, i.e. to identify and prioritise current and potential risks of deviation from the Terms, as well as mapping the supply chain with special regard to high risk operations, 2.5 adopted routines for regular follow-up of the Terms compliance, and 2.6 adopted routines to immediate action to prevent and limit deviations from the Terms, and to make amendments to identified deviations. The measures shall be taken in accordance with the UN Guiding Principles on Business and Human Rights, or the equivalent. 3. Follow-up [The contracting authority] has the right to follow-up that the supplier fulfils its obligations. The follow-up may be carried out in different steps; self-assessment and audit. 3.1 Self-assessment Upon request from [the contracting authority] the supplier shall, [within six (6) weeks/other time period, specified by the contracting authority] from the receipt of the request, report compliance with the Terms in writing. The account can be submitted by form, according to appendix 1: self-assessment questionnaire. The supplier is expected to provide the information requested in the appendix. 3.2 Audit The supplier shall enable [the contracting authority] to perform audits, on their own or through a representative, with the supplier and/or its subcontractors to ensure that the supplier fulfils the obligations according to item 1 and complies with the Terms. The supplier shall provide the information and documentation necessary in connection with the audit. 4. Management of deficiencies If the supplier does not participate in follow-up or if there are deficiencies in the documentation to be provided under item 3, a correction shall be made within the time determined by [the contracting authority]. In case of deficiencies in compliance to the Terms, the supplier shall amend this according to a schedule and action plan, developed by the supplier, and to be approved by [the contracting authority]. The schedule and action plan are to be developed within the time period decided by [the contracting authority] and must be proportionate to the nature of the deficiencies and clearly describe how these are to be remedied within the established schedule. [The contracting authority] has the right to terminate the contract with immediate effect if the supplier do not make amendments within the established period or do not remedy deficiencies within the established schedule. [The contracting authority] has the right to terminate the contract with immediate effect in the case of severe deviations from the Terms.
	Routines for the substitution of hazardous substances in products	Advanced	Special contract terms
Criterion information By setting this requirement, you ensure that suppliers work actively to replace substances that are hazardous to the health and environment that are used in their products. Criterion text As part of its operations as manufacturer (trademark owner), the supplier shall have implemented procedures, models, assessment systems or similar, to substitute substances hazardous to the health or environment present in the equipment. The supplier shall also have their own documented procedures for how this should be handled toward the purchaser. The procedures or similar, shall be documented and put into action throughout the term of the contract. They must at least include the five steps in the European Chemicals Agency's (ECHA's) model for substitution to safer chemicals¹: Identify substances of concern Search for alternatives Assess, compare and select alternatives Test, implement and improve Inform your supply chain Within [three weeks/other time determined by the contracting organisation] of receiving a request from the contracting organisation, the supplier must present procedures etc. for how these steps are implemented with regards to the contracted products.

Ovens

Filter

Extent